Vinyl Application

Vinyl Application

Step 1


It’s Important that you apply your vinyl in 50 to 60 degree environment. Clean the surface with a cleaner. Take two pieces of tape and fix top corners in the approximate location.

Step 2


Measure off a straight edge and adjust by lifting taped corners to desired environment.

Step 3


Apply some new tape across the entire top creating a hinge.

Step 4


Hing up the sign so you can peel off the back exposing the adhesive (sticky) side. Peel off slowly and be careful not to lift any letters.

Step 5


Hing the sign back down and using a squeegee or credit card to apply the vinyl

Step 6


After you have applied vinyl slowly remove the application tape, if you have any bubbles use a pin or an exacto knife to let the air out.